2003 A160 1.6D - Heater fan panel pin data

[Mad Professor]

Good Day All.

A mate of mine has asked me to look at his 2003 A160 1.6D, with regards to his heater fan not working.

When the control panel was removed the 10pin block had two melted wires, and had cooked the control panel / board, so I sent me mate to find a new control pannel.

The problem I now have is that I don't know witch way round thease two burnt wires go into the new connector.

This is what I do know.

Pin 1 - Red/Yellow.
Pin 2 - N/C.
Pin 3 - Red/White.
Pin 4 - Gray/Blue.
Pin 5 - ?.
Pin 6 - Brown.
Pin 7 - ?.
Pin 8 - N/C.
Pin 9 - Red/Blue.
Pin 10 - N/C.

I can't find the info I need on Autodata, or Workshop VIVID.

Can anyone here tell me what colour wires Pin 5 & 7 should be?

Thanks for your time.

 

[Mad Professor]

I found the data I needed, it was hiding in Autodata. :Oops:

Pin 1 - Red/Yellow.
Pin 2 - N/C.
Pin 3 - Red/White.
Pin 4 - Gray/Blue.
Pin 5 - Black/White.
Pin 6 - Brown.
Pin 7 - Red.
Pin 8 - N/C.
Pin 9 - Red/Blue.
Pin 10 - N/C.

Regards.
Mad Professor.