2004 W211 E320 CDI OM648 transmission

[Oskar_Soomets]

Hello, so this is my first time writing here. But i wanted to ask. I own a 2004 W211 E320 CDI OM648 and has a slight tune on it, dyno test showed 200kw to the wheels, and it has the good old 722.6 transmission. But what i wanted to ask was lets say i wanted to do a burnout with it would i cause any sort of damage or is there anything i should watch out for? The transmission shifts like new and without any problems, its a well taken care of tranny, so my question stands what should i look out for?
With regards Oskar

 

[mioba]

Not sure how many of these transmissions are found in cars made for doing burnouts.

 

[Oskar_Soomets]

Not sure how many of these transmissions are found in cars made for doing burnouts.

The thing is i just want to do a quick one and roast what is keft of the rear tires but i dont want to ruin the tranny

 

[mioba]

ha ha.
Go for it buddy, your car your choice.

 

[00slk]

Don't forget to video it for us

Lock the trans in low gear otherwise it will keep changing up and kill the tyre smoke

 

[mersum1es]

recently read that MB power steering pump does not like steering locked fully on end and high revs. So too many donuts are bad for you and your car health...?

 

[Oskar_Soomets]

recently read that MB power steering pump does not like steering locked fully on end and high revs. So too many donuts are bad for you and your car health...?

Well i was thinking of doing a burnout and i also did it a few times since i asked this here and everything seems fine so far, and i also made sure the surface was wet to not destroy my tires and tranny