99 CLK 200 Drivers door sag??

Mikesmerc

Senior Member
Joined
Jul 3, 2003
Messages
954
Reaction score
7
Location
Co.Cork IRL
Your Mercedes
2001 CL500,1990 560SEC, 1988 230E, 1982 250, 1979 280CE, 1977 200D, 1972 350 SL, 1965 220S Fintail
Just bought the above for the missus, the drivers door seems to have dropped slightly and it needs a hefty push to close to the second catch. I tried lifting the door by hand to see if there was any play in the hinges but with no sign.Was thinking of slackening the door bolts and raising the back of the door to counter act this.
Any ideas?
Thanks
Mike
70k
 

guydewdney

Senior Member
Joined
Aug 4, 2003
Messages
796
Reaction score
0
Location
Tring, Herts
Website
www.atct.co.uk
the bolts are all adjustable - loosen SLIGHTLY and yank door up. re-tighten. try. re-do agian and again until you are happy (the doors on my coupe I spent 3 hours getting it right to within 1mm all round...)

OH - do the bolts on the surface that is parallel to the door when its closed - on mine thats the ones on the door, not the pillar.
 
OP
M

Mikesmerc

Senior Member
Joined
Jul 3, 2003
Messages
954
Reaction score
7
Location
Co.Cork IRL
Your Mercedes
2001 CL500,1990 560SEC, 1988 230E, 1982 250, 1979 280CE, 1977 200D, 1972 350 SL, 1965 220S Fintail
  • Thread Starter
  • Thread starter
  • #4
The same bolts on my one Guy, will give it a go over the wkend. Wouldnt think that its the stiker plate Tom, as the door the sits correctly when closed.
Cheers
Mike
 

Avantgarde Automotive, Mercedes-Benz and SLR McLaren specialists. Service, repairs, diagnosis and motorsport preparation.
Unit 14 Hither Green Trading Estate, Clevedon, Somerset, BS21 6XU Tel: 01275 217270 Email:steve@avantgarde-automotive.co.uk
www.avantgarde-automotive.co.uk
Top Bottom