A-class W176 1.8 CDI coolant temperature

JiSingh1

New Member
Joined
Feb 12, 2022
Messages
3
Reaction score
0
Your Mercedes
A-Class W176 2013 1.8 CDI
Hi guys,

can anyone tell me how long their car takes to get up to the roughly 90° degree coolant mark in a W176 Diesel?

My mum has the 2013 W176 A-Class A180 CDI.

She told her stop start stopped working a while ago, i thought this was the auxiliary battery but was no error about it on the dash.
We just left it and put it down to her driving the car about once a week roughly.

However today I was with her and after a combined 25 minutes roughly of driving and idling, the coolant temperature gauge was around 60/70.

I feel like it should have been warmed up by that point and that it is taking too long? Can anyone tell me if this is normal or not?

Got no errors on dash. In my little Polo, stop start only works after certain conditions are met, like economy and temperature.

Thank you
J
 

Blobcat

Moderator
Joined
Feb 8, 2006
Messages
40,152
Reaction score
29,780
Location
Grange Moor
Your Mercedes
R171 SLK280, Smart R451, Land Rover 110 County SW, 997 C2S, R1250 GSA TE 40th, CBR600FP
Hello and welcome,

8-10 minutes depending upon ambient air and engine usage, replace the thermostat.

You won’t necessarily get any dash warnings for a battery issue. Measure it at rest (engine off) preferably first thing in the morning. Anything less than 12.4v and the battery needs charging/replacing.
 

grahamcol

Senior Member
Joined
Jan 12, 2009
Messages
1,860
Reaction score
635
Location
West Midlands
Your Mercedes
2001 SLK230, 2007 CLK220 CDI
As above, replace the thermostat. You'll likely find the fuel economy better as a result !
 

Bahnsturmer

Senior Member
Joined
Jan 13, 2022
Messages
170
Reaction score
92
Location
Devon
Your Mercedes
2002 E320 CDI Estate
Yep thermostat. I had the same problem recently. Changing the thermostat solved the problem.
 
OP
J

JiSingh1

New Member
Joined
Feb 12, 2022
Messages
3
Reaction score
0
Your Mercedes
A-Class W176 2013 1.8 CDI
  • Thread Starter
  • Thread starter
  • #5
Hello and welcome,

8-10 minutes depending upon ambient air and engine usage, replace the thermostat.

You won’t necessarily get any dash warnings for a battery issue. Measure it at rest (engine off) preferably first thing in the morning. Anything less than 12.4v and the battery needs charging/replacing.
Thank you.

Would have thought there'd be a P0128 code or something if the thermostat had a problem.

The battery did die a few weeks ago and had to be jump started. Will get my multimeter to check. So just put it on 20V DC and just check the voltage, simple as, right?
 
Top Bottom