ABS/power steering

Naraic

Moderator
Joined
Mar 4, 2010
Messages
10,686
Reaction score
1,274
Your Mercedes
2005 CL500.
Twice now, the ABS warning light has come on.

Once last night in very wet weather, and again this morning in very wet weather.

When I started out this morning the ABS light did not come on until a few minutes into my journey, and several very deep puddles and small floods.

At the same time the power steering gets noticeably heavier.
I thought it was just my imagination but after a brief stop when the ABS light did not come back on, the steering was back to normal.

The question is...is there a link of any kind between the ABS and the steering? I believe my car has parameter steering which is an additional electric assistance to the rack.
 
Last edited:

EmilysDad

Senior Member
Joined
May 8, 2012
Messages
12,176
Reaction score
5,747
Location
Bury Lancs
Your Mercedes
ML350
power steering is usually speed sensitive & the ABS wheel sensors will ultimately provide that speed signal. If you've a u/s ABS sensor the power steering won't know how fast you're going.
 
OP
N

Naraic

Moderator
Joined
Mar 4, 2010
Messages
10,686
Reaction score
1,274
Your Mercedes
2005 CL500.
  • Thread Starter
  • Thread starter
  • Moderator
  • #3
I've been able to read the codes. It is likely the YAW sensor. Thanks for your reply.
 


Welwyn Merx Limited is a family run business with genuine passion, dedication and 25 years of experience dealing with Mercedes-Benz and AMG passenger cars.
Tel: 01707 395999www.welwynmerx.uk
Top Bottom