Analogue clock

[Pitsmoor Col]

Is it possible to install analogue clock in the W205 centre console ?
Edit.
Just found some info on another forum.

 

[Pitsmoor Col]

Just finished fitting the clock loom ready for the centre console change, which maybe next week. Not too difficult a job, The hardest part was getting to the front SAM behind the drivers kick panel, to connect the Yellow LIN wire to terminal 26 which is in the Blue COC connector. It's a Blue plug with a Grey locking bar that needs pushing up then you can pull the Blue plug out. I had to dismantle the plug to locate terminal 26, took some figuring out because I had never seen a plug like it before. But number 26 was occupied most likely to update the digital clock so I got the soldering iron out and tapped in to it. I wont know if it's been successful until I change the centre console with the analogue clock in it.

 

[Pitsmoor Col]

When I install the new to me centre console I am going to install some 3 colour illuminated vents I got from Amazon at the same time, I have had a look at the job and it looks like I will need some small connecting plugs. Does any one know where I can obtain these plugs please. ?

 

[Pitsmoor Col]

Just finished fitting the clock loom ready for the centre console change, which maybe next week. Not too difficult a job, The hardest part was getting to the front SAM behind the drivers kick panel, to connect the Yellow LIN wire to terminal 26 which is in the Blue COC connector. It's a Blue plug with a Grey locking bar that needs pushing up then you can pull the Blue plug out. I had to dismantle the plug to locate terminal 26, took some figuring out because I had never seen a plug like it before. But number 26 was occupied most likely to update the digital clock so I got the soldering iron out and tapped in to it. I wont know if it's been successful until I change the centre console with the analogue clock in it.

I have just swapped piano Black centre console without analogue clock for a Dark Wood effect one with a Clock, I was thinking about wrapping mine with some carbon fibre effect stuff because I did not like the Piano Black. But then I still would not have the clock, so I went on F/B Market place and got the console with a clock from a breakers yard for £100 I am dead chuffed with the result, it looks brilliant. All the instructions for doing the conversion are on various MB sites including this one, I can't remember where I got the wiring loom from, but will have a look back and put the name on here.

 

[Pitsmoor Col]

I can't remember where I got the wiring loom from, but will have a look back and put the name on here.

Mercedes Retrofit Specialists - Braybrooks

We are the leading Mercedes Retrofit Specialists with a growing portfolio of retrofits to ensure that your vehicle can be tailored to exact requirements.

braybrooks.co.uk