cold starting on 300 SE - suggestions please

PhilT

Member
Joined
Oct 1, 2001
Messages
12
Reaction score
0
Location
stoke on trent
feels like 'choke' isn't working, will start but is reluctant to rev or tickover.
Is it likely to be the cold start injector at fault, or the auxillary air device?
Is there any tests I can do to find the problem?
thanks
Phil
 

Andy

Senior Member
Joined
May 28, 2001
Messages
1,247
Reaction score
0
Location
West Midlands
Website
www.mercedesservicing.com
cold starting on 300 SE

Hi Phil,

You might check the overload protection relay fuse. Sited under the bonnet close to the back in amongst the main control relays. You will find the there a smallish relay with a transparent top. There is a red fuse in it. Check it. Its proberly blown. If the ABS light stays on all the while. Then this is almost certainly your problem. If not then you will need to get it in to a specialist or your dealer.

Regards
Andy @www.mercedesservicing.com
 
OP
P

PhilT

Member
Joined
Oct 1, 2001
Messages
12
Reaction score
0
Location
stoke on trent
  • Thread Starter
  • Thread starter
  • #3
cold starting on 300 SE

Thanks Andy
You were spot on, fuse was blown, I've replaced it and it works fine now.
Thanks for your help
Phil
 


Mercedes-Benz Servicing, repairs, engine and diagnostics
Wayne Gates - Mercedes-Benz, Unit F3, Phoenix Industrial Estate, Rosslyn Crescent, Harrow, Middlesex, HA1 2SP
Tel: 020 8863 9233
Established for 20 years all vehicles washed and vacuumed.
Top Bottom