Fault codes on E211

[alan ainsworth]

Can anybody help, I have a new E211 showing fault codes 9182 & 91A2.

Resistance in Front passenger ETR ignition squib too low
Resistance in Driver ETR ignition squib too low

SRS light is displayed.

Are these common faults?

 

[alan ainsworth]

fault codes

Its sorted, the connectors for the seatbelts have locking levers on them. If the locking levers are not pushed FULLY home the shorting links on the pre-tensioners and belt grabbers are still in circuit. This shows up to the SRS system as a low resistance in the circuit and generates the fault codes.

 

[teky]

ahaaa for now it is the sqib/clock spring is worn and will give problems you could tape the worn sections

 

[alan ainsworth]

Fault codes on SRS

Is the clockspring a common fault? This vehicle has only covered around 4000 miles. The vehicle checks out fine at the moment but thanks for the advice its much appreciated.

 

[teky]

its not a coomon fault your code dont add up

 

[teky]

there is no such thing as 9 prefix

 

[alan ainsworth]

I have got a print out from the star diagnosis unit and its full of "9" prefix fault codes, mainly to do with the SRS system. It is a E211 not 210 if that makes any difference.

Not trying to pick holes just trying to understand the vehicle. Thanks for your help.