Headlamp adjuster

[stwat]

I recently got my headlamp adjuster working again by replaceing the rubber connector on one of the headlights. The problem now is that the lights point skyward!!!! I have to drive around with the switch on #3 all the time but they still dazzle poor oncoming drivers..

They had obviously been set up when the pipe was disconnected.. I have noticed that when i turn the engine off the lights drop down back to normal, even with switch at #3

My question is,,, do you have to align the headlights up with the engine running??

I hope that all makes sence

Cheers,

Stu

 

[tom7035]

Hi Stu.
Yes, the engine must be running and the switch set to position '0' when adjusting.
Cheers, Tom.

 

[stwat]

Many thanks Tom 8)


Stu :smile: