John77
Senior Member
- Joined
- Nov 19, 2018
- Messages
- 789
- Reaction score
- 218
- Your Mercedes
- E200 Estate 2011, 2009 SLK 200
I have just changed the Crankshaft Position Sensor on a W221. Mine is actually a S221, 2011 E200 Estate CGI. Well you cannot even see it from the top never mind unbolt it to remove it. There is no gap between the engine and the bulkhead on this car. Anyway changed it from below with great difficulty, as I do not have a full lift, so not too far off the ground.
So you need to get it from underneath and then unless you have a full lift which I don't you cannot see it. I have taken photos see below.
It is somewhere here.
Yes seen the oil. My next Thread.
Somewhere There. But you cannot see it from below.
This is with the camera lifted in the gap.
From above with the camera lifted above.
So you need to get it from underneath and then unless you have a full lift which I don't you cannot see it. I have taken photos see below.
It is somewhere here.
Yes seen the oil. My next Thread.
Somewhere There. But you cannot see it from below.
This is with the camera lifted in the gap.
From above with the camera lifted above.
