Knocking From Front Suspension

whammer007

Active Member
Joined
Nov 8, 2005
Messages
44
Reaction score
0
Hi all,

I was getting a knocking from my W210 front suspension a while back, and both lower front ball joints were replaced. This all but cured the knocking, though some noise persisted.
When the car was MOT'd last month, I asked the mechanic to pay particular attention to the front explaining about the noise. The car passed fine, and he reported that all was well.
Is the anything else I should be looking for under here that would be common for causing a slight knock?
It is brought on mainly by driving over poorly surfaced roads, it's like kind of a tapping/rattling. It appears to be coming from behind the line of the front wheels.
Any help greatly appreciated.

Regards,

Whammer
 

Blobcat

Moderator
Joined
Feb 8, 2006
Messages
40,396
Reaction score
30,231
Location
Grange Moor
Your Mercedes
R171 SLK280, Smart R451, Land Rover 110 County SW, 997 C2S, R1250 GSA TE 40th, CBR600FP
Did you have the anti roll bar bushes changed? I found that the anti roll bar bushes were making the knocking noise and the lower ball joints made no noise.
 
OP
W

whammer007

Active Member
Joined
Nov 8, 2005
Messages
44
Reaction score
0
  • Thread Starter
  • Thread starter
  • #3
Hi mate,

No nothing else has been changed apart from the ball joints. Are you talking about the saddle bushes on the anti roll bar, or are there drop links on the ends?
I can't recall the suspension setup from memory.

Regards,

Whammer
 
OP
W

whammer007

Active Member
Joined
Nov 8, 2005
Messages
44
Reaction score
0
  • Thread Starter
  • Thread starter
  • #5
Hi mate,

What kind of money was in that repair? The drop links look straightforward, although I'm not sure about the middle bush.

Regards,

Whammer
 

Blobcat

Moderator
Joined
Feb 8, 2006
Messages
40,396
Reaction score
30,231
Location
Grange Moor
Your Mercedes
R171 SLK280, Smart R451, Land Rover 110 County SW, 997 C2S, R1250 GSA TE 40th, CBR600FP
£35.61 for the parts from MB (10th March 05) & £15 labour Although that wasn't dealer prices...
 


GAD was founded in 2009 where we developed bespoke ECU Remapping software for motorsport clients, moving forward, we have extended to road vehicles for both performance and economy,
contact GAD Tuninghttp://www.GADTuning.co.ukto discuss your requirements.
Top Bottom