Mercedes alloy wheel bolts for W202

markymark1

New Member
Joined
Feb 13, 2009
Messages
8
Reaction score
0
Location
Bristol
Your Mercedes
W202 230 Elegance 1997
Hi have just bought some alloys but need to know what bolts i need for them, ie length pitch etc and the best place to buy them.
Regards Mark
 

brianbrian

Senior Member
Joined
Sep 27, 2008
Messages
2,758
Reaction score
191
Age
82
Location
cockney in the West Country
Your Mercedes
w124 250D, SL129-deisel
Just take one wheel to a shop that sells alloy wheels.(look in phone book) for advice, hope this helps.
 

dave.robbo

Senior Member
Joined
May 24, 2008
Messages
311
Reaction score
2
Age
54
Location
Gloucester
Your Mercedes
2004 SLK 350 R171
Where are you? I have some spare alloy wheel bolts..
 
OP
M

markymark1

New Member
Joined
Feb 13, 2009
Messages
8
Reaction score
0
Location
Bristol
Your Mercedes
W202 230 Elegance 1997
  • Thread Starter
  • Thread starter
  • #5
Hi i live in Bristol not far from glos.
Regards Mark
 

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
377
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
The car shops sell chrome ones at £1 (top gear) and MB take £1.80 for those that go rusty in 2 weeks
 
OP
M

markymark1

New Member
Joined
Feb 13, 2009
Messages
8
Reaction score
0
Location
Bristol
Your Mercedes
W202 230 Elegance 1997
  • Thread Starter
  • Thread starter
  • #7
Hi just need to know the length and pitch etc.
Regards Mark
 

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
377
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
Best to take one out at the shop,,should be 28mm long I think, you can take one out without jacking the car
 
OP
M

markymark1

New Member
Joined
Feb 13, 2009
Messages
8
Reaction score
0
Location
Bristol
Your Mercedes
W202 230 Elegance 1997
  • Thread Starter
  • Thread starter
  • #9
Hi i have the wheels but no bolts so do not know the size.
Regards Mark
 

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
377
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
202 bolts are all 12mm, when the bolt is placed in the hole, you need about 12mm sticking out of the rear, there is only one standard thread pitch
 

roofless

Senior Member
Joined
Mar 30, 2007
Messages
1,952
Reaction score
2
Your Mercedes
w124 e220 estate
are the wheels mercedes or aftermarket
 

roofless

Senior Member
Joined
Mar 30, 2007
Messages
1,952
Reaction score
2
Your Mercedes
w124 e220 estate
when you do get some bolts try spinning a rear wheel by hand to check the bolts don't foul the parking brake
 

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
377
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
when you do get some bolts try spinning a rear wheel by hand to check the bolts don't foul the parking brake

Very good point for the rears, thank you, the front does not matter
 

philharve

Senior Member
Joined
Jan 20, 2005
Messages
1,773
Reaction score
5
Age
73
Location
Falmouth, Cornwall, United Kingdom
Website
go.to
Your Mercedes
W202 C230K Auto 2000
Alloy wheel bolts

Hi markymark1

I purchased a set of wheel bolts on ebay very cheaply. Had i not been lucky I would have tried a breakers next. The pitch is standard but their length must match the wheels.

REGARDS

Phil
 
OP
M

markymark1

New Member
Joined
Feb 13, 2009
Messages
8
Reaction score
0
Location
Bristol
Your Mercedes
W202 230 Elegance 1997
  • Thread Starter
  • Thread starter
  • #17
Hi wheels are arriving soon,genuine mercedes, wheels on the car are original steel ones.
Regards Mark
 

Stop looking for the Best Garage!! We are here and have the best advanced solutions for you, at Competitive prices. Put us to test with any issue you may have.
Top Bottom