Need part numbers

[jtripp]

Hi everyone: I belong to the Mercedes Club of America and need some information not available in the US.

I had a '93 300SD with a defective 603.971 engine. The last S class turbodiesels imported to the US were the '95 models. However Mercedes delivered S class turbodiesels with the 24 valve 606 engine to other markets.

I have successfully installed a '99 E300 606.962 complete with a custom made intercooler. The car runs great. It is probably the only one of it's kind in America.

My problem is that the new Boge motor mounts seem to be too soft for the 606 engine and I get some drumming accellerating on slight left turns.

Can any of your members supply me with the proper part numbers for right and left motor mounts for the european '96 to '99 S300 which would be the equivalent car to mine? Thanks for any help.

 

[television]

What a clean car you have, and welcome

Try the numbers in the link

http://www.detali.ru/cat/oem_mb2.as...GA=722.608&CT=F&cat=45P&SID=24&SGR=015&SGN=02

 

[kth286]

No it is not that one.

It looks like this one below:

http://www.detali.ru/cat/oem_mb2.as...GA=722.608&CT=M&cat=19T&SID=22&SGR=010&SGN=01

Do bear in mind it is installed in the W210 car and not the W140 car like yours.

 

[jtripp]

Thanks for everyones efforts. The parts I need are the hydraulic engine mounts shown in post #2. They are item #5. I need the corresponding parts used in the 140 chassis because they have a different mounting arrangement in the 140 than the E class. I used the original aluminum mount arms from the 603 engine on the 606 engine. By the way the 606 engine has the same exterior physical dimensions except block height as the 603 and all the mounting holes are duplicated.

Joe Tripp member of Sea Level Section MBCA since 1976
Continuous Benz ownership since 1964
'93 300SD 87,000 mi. '95 S350 130,000 mi. '99 S600 Sold- one of 14