Programming Radio (2011 E-class convertible)

[Tim Collis]

Hi all, I am trying - not very successfully - to add radio stations into my sterio radio. I am following the instructions in the manual and can get as far as selecting the MHz frequency but I then can't see how to store the station. Also the manual shows how to add DAB channels in, but on my radio DAB does not come up as an option.

Any advice would be very greatly appreciated.

Thanks,

Tim,.

 

[EmilysDad]

you often just need to press & hold the button of the number you want it stored on until you get some kind of beep/tone

 

[sonic]

2011 E classes didn't have DAB.
Press one of the channel buttons, then select the programme you want to save by the up/down buttons.
Press & hold the channel button again until it beeps.

 

[JBell]

2011 E classes didn't have DAB.

Some did, it was a very expensive option, IIRC COMAND online can retrofit it for £500

 

[sonic]

Some did, it was a very expensive option, IIRC COMAND online can retrofit it for £500

Thanks for that, my 2011 E class certainly dose not have it.

 

[JBell]

Thanks for that, my 2011 E class certainly dose not have it.

I was looking at putting it in my W204 but £500 is a bit much so Alexa Auto it is for £25

 

[Tim Collis]

you often just need to press & hold the button of the number you want it stored on until you get some kind of beep/tone

Thank you I will give it a go.

 

[Tim Collis]

Some did, it was a very expensive option, IIRC COMAND online can retrofit it for £500

2011 E classes didn't have DAB.
Press one of the channel buttons, then select the programme you want to save by the up/down buttons.
Press & hold the channel button again until it beeps.

ok thank you, that explains why it does not show up on the screen but is in the handbook.