w211 e320 cdi vibrating problem

Bobby Abraham

Member
Joined
Apr 28, 2008
Messages
11
Reaction score
0
Hi my 2003 w211 e320 cdi has developed a vibrating problem when at idle and reverse but when i speed up it disappears. The only thing that comes to mind are engine mounts but from time to time the vibration goes away at idle.

Could anyone tell me how to check the engine mounts and how to replace them.

Any help would be great.

Thanks

BOBBY
 

rainier

Senior Member
Joined
Jan 20, 2009
Messages
161
Reaction score
3
Your Mercedes
300e 24v/1993/3.0l
Hi,
I once had a vibration prob but it was at idle and at approx 70mph.
After a lot of swearing,searching and trying other similar cars was unable to find a damn thing.Just replaced the 2 engine mountings and the problem went away.
On inspection the old mountings looked perfect with no cracks/perishing so I could only assume that they had gone hard.
If the engine is idling ok(ie not an injection fault for example) its worth replacing the mountings.
Hope this helps.
 

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
383
Age
90
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
I was away when Bobby posted,,I can send you a how to paper
 

MB TECH WARRINGTON

Senior Member
Joined
Jun 2, 2008
Messages
572
Reaction score
0
when the car is juddering, open the bonnet, look at the belt, see if its bouncing about, alternator pulley most likely if your belt is bouncing.

but with explanations of juddering etc it is hard as descriptions can be hard to get across to someone else. and can also be misinterpreted.

the best advice i can offer is,, before you spend money on anything get it checked by someone who is experienced on mercedes. guesswork can cost lots of money.
 

wireman

Senior Member
Joined
Sep 20, 2005
Messages
2,632
Reaction score
4
Location
lancashire
Your Mercedes
nice 201 2.5D 1993 & very nice 129 SL500 1994
I'll agree with MB TECH, but my car had what I interpret as similar problems which were cured with new engine mounts.
 


GAD was founded in 2009 where we developed bespoke ECU Remapping software for motorsport clients, moving forward, we have extended to road vehicles for both performance and economy,
contact GAD Tuninghttp://www.GADTuning.co.ukto discuss your requirements.
Top Bottom