Where Oh Where is my CPS?

[lepton]

I have searched everywhere. Checked the 10 O'Clock position on the bellhousing but can only see the sensor shown in the pics below. Very different from the replacement cps. Can anyone help?
Sorry the pics have not attached. Don't know why not!

 

[television]

What is the car young man

 

[lepton]

Hi Malcolm, its a 1990 300se. I have have them attached but don't know how to make them appear on the message.
Alan

 

[television]

It is 23 in the link and sits right above the starter on the bell housing

http://www.detali.ru/cat/oem_mb2.as...&L=765.706&CT=M&cat=14K&SID=15&SGR=090&SGN=05

 

[lepton]

The sensor there looks nothing like the replacement part Malcolm. Wish I new why the attached pics don,t show.

 

[television]

If you are uploading from your computer,,click on the manage attachments, below where you post an answer, go to your pictures, find the picture that you want to show, click on it, then open, then click the upload button. when uploaded and all OK you will see the image details below in the manage attachments are.

For the picture that I have uploaded here I can see the details in that box as

!cid_7EBE379A-D5AB-4493-9B7B-B54C49CFB03E.jpg (39.1 KB)

 

[lepton]

Attachments









Finally worked it out!

 

[lepton]

Attachments

View attachment 8993 Possible cps without connector

View attachment 8995 With connector

View attachment 8997 Connector

View attachment 8998 New replacement cps

 

[television]

That looks like the cap only,,I think we must wait for a techie to come on line

 

[lepton]

Thanks again Malcolm. By the way, Bosch couldn't do a replacement CPS for this model. I had to go to Mercedes - £120 + VAT. They did say that the original part had been modified.

 

[Ultymate]

The last photograph looks exactly like No23 in Malcolm's schematic link to my eyes

 

[lepton]

Thanks for clarifying that. I agree, the replacement cps is the same part as shown in Malcolm's diagram. However, its nothing like the sensor on my bellhousing in the position indicated on the diagram. Either the part has changed or the sensor in my pic is not the cps. If its not the cps where can the cps be located.

 

[television]

Let me have the next 3 numbers after 126 and I will see what I have

 

[lepton]

Thanks Malcolm.
VIN WTB1260242A553690

 

[star]

Has it gone wrong? Never fitter one to a 103 engine in over 25 yrs.

 

[television]

Has it gone wrong? Never fitter one to a 103 engine in over 25 yrs.

This has been said by other mechanics too

 

[lepton]

Engine only starts when cold and then begrudgingly after 30 seconds of cranking. Starts missing when up to temperature. Stalls then refuses to start until cold.
Replaced HT leads, distributer cap, OVP, fuel pump relay and coil in the last 12months. I can't think of anything else other than the CPS.

 

[Cole@MBS]

Ign amp?????

 

[star]

Fuel inj temp sensor, could be overfuelling when warm.

 

[Alex Crow]

picture 1 is the oil pressure sensor. so is picture 2. picture 3 is the plug for the oil pressure sensor. picture 4 is definately the correct part, which will not be the problem