- Joined
- Mar 25, 2010
- Messages
- 15,148
- Reaction score
- 6,325
- Location
- Tonbridge
- Your Mercedes
- W221 S65 AMG - W204 C63 AMG + Various other MB's
- Moderator
- #1
Hi all
My 208 cabrio wont normalise the drivers window.
Plugged it into STAR and the Hall sensor just shows 65382 and doesnt change when the window is put up or down.
Suspect faulty door control module and replaced, but same thing, hall values dont change, and as soon as you let go of the window button, it drops 2 inches or so.
Obvious next step is replace the window motor/mech however it looks as though somebody has been there before me as the bits the mechanism sits in is gouged up.
Is there anything I am missing before I stump up the money for the window motor?
My 208 cabrio wont normalise the drivers window.
Plugged it into STAR and the Hall sensor just shows 65382 and doesnt change when the window is put up or down.
Suspect faulty door control module and replaced, but same thing, hall values dont change, and as soon as you let go of the window button, it drops 2 inches or so.
Obvious next step is replace the window motor/mech however it looks as though somebody has been there before me as the bits the mechanism sits in is gouged up.
Is there anything I am missing before I stump up the money for the window motor?