Windshield Washer

Status
Not open for further replies.

steve1173

New Member
Joined
Apr 22, 2003
Messages
7
Reaction score
0
Location
punta gorda, florida
Just got my 2003 SLK230 the other day. Went to put some windshield washer fluid in the receptacle for it but it all drained out the bottom of the car. Seems the receptacle goes into the fender wall but can't see the bottle. Will call the dealer tomorrow but any ideas why???
 

slkgus

Active Member
Joined
Feb 28, 2003
Messages
38
Reaction score
0
Location
london
washer loosing fluid

Mine too
very interested to know why
think it may be a dodgy gromet-after 14months!!
Please keep posting!!
best regards
 
OP
S

steve1173

New Member
Joined
Apr 22, 2003
Messages
7
Reaction score
0
Location
punta gorda, florida
  • Thread Starter
  • Thread starter
  • #3
Went to the dealer he showed me 2 others that did that. Seems they have an overfill but I can't understand why. One person on the net said it was a factory defect & some dealers are siliconing it closed. Spoke with MB customer service tech support who were totally useless.
 

northwest-tech

Active Member
Joined
Apr 18, 2003
Messages
35
Reaction score
0
lol had this a lot

the bit where u pour the water into is only a funnel

there is no need to silicone this part up it only holds 1/2 pint if that
 

slkgus

Active Member
Joined
Feb 28, 2003
Messages
38
Reaction score
0
Location
london
Why then does my Low Screen wash lamp Light when the fluid leaks-it never happen before and what about the waste of WATER and Screen Wash
Interesting to see what the Capacity is of screenwash bottle but I am sure it was more than ' .5l' on previous top ups......
 
OP
S

steve1173

New Member
Joined
Apr 22, 2003
Messages
7
Reaction score
0
Location
punta gorda, florida
  • Thread Starter
  • Thread starter
  • #7
northwest-tech said:
lol had this a lot

the bit where u pour the water into is only a funnel

there is no need to silicone this part up it only holds 1/2 pint if that

Not looking for the extra 1/2 pint, but this way you would know when it was full by seeing it come to the top without it spilling on the floor from the over full.
 
Status
Not open for further replies.


GAD was founded in 2009 where we developed bespoke ECU Remapping software for motorsport clients, moving forward, we have extended to road vehicles for both performance and economy,
contact GAD Tuninghttp://www.GADTuning.co.ukto discuss your requirements.
Top Bottom