OP
ADP
Senior Member
- Joined
- Oct 22, 2006
- Messages
- 79
- Reaction score
- 0
- Location
- Worcestershire
- Your Mercedes
- C200K, SL500.
- Thread Starter
- Thread starter
- #21
Until the fault code has been reset you're stuck. If the sensor is just on/off then either the wiring is dodgy or the ECU has a problem if it's generating this fault code consistently.
The garage said they couldn't reset that fault, but did reset a few others. Some did mention that the sensor for the automatic release (the one that senses if the can is about to roll) needed to be reset, is this possible and is it connected to the switch?
Adp