Search results

You sure? Brabus do loads of vitos, has the brabus exhaust tips too, plus don’t forget if you buy a brabus tuning box they come with a brabus badge, no different than a mountune badge on a Ford with mountune bits ::EDIT:: Might be a brabus Vito sport X Sent from my iPhone using Tapatalk

Must be the colour, I have a soft spot for a blue CLS [emoji1] I don’t know why but I saw the pictures in autoevo and just fallen in love with the shape Sent from my iPhone using Tapatalk

I have to say as much as I love the 219 I’ve never really liked any of the newer CLS’s but this Facelift looks stunning Sent from my iPhone using Tapatalk

Have to disagree, a larger straight 6, V6 or V8 diesels can sound amazing. Sent from my iPhone using Tapatalk

Thanks buddy :) Just to chime in, I have a 2008 pre facelift CLS320 cdi 3rd owner (second owner my mate from Mercedes Benz of Stourbridge) and still full Mercedes service history. Mine I a little modified, lowered suspension (bilstein b8 kit) custom rolling road remap, slightly larger front...

Don’t forget to wax where I’ve removed the badges/applied anything to remove the sticky stuff as you’ll have stripped off any wax (no wax under the letters!) Sent from my iPhone using Tapatalk

The weight rating is when it’s being driven for stability reasons, it’s only like 25kg folded down with no one in it (plus his modified Land Rover awning! Haha) Sent from my iPhone using Tapatalk

Not me camping, friend was down here working in the southwest 40 minutes drive from me so I paid him a visit, he’s got this amazing pop up “tent box” stupidly comfy, memory foam and as he says really warm. I might have to look into one. Oh yes it really does, such a little change made...

Talk to someone like MSL performance or GAD tuning who both specialise in Mercedes remapping and tuning Sent from my iPhone using Tapatalk

Thought I’d do a little write up on my little upgrade on my cls320cdi, at some point a Mercedes dealer (who shall remain nameless) have replaced a front calliper for a previous owner with a different design so both front stoppers we’re different! I decided come disc/pad replacement time I’d...

especially if you're on air suspension I know someone with 20" wheels on air (little too big for my tastes) and the ride of his car is still good thanks buddy :)

No, my CLS320 has factory 245/40/18 and rear 275/35/18. I believe the airmatic models with the same wheels should have 255/40/18 and 285/35/18. My CLS has a smooth ride with the 18s even with shorter bilstein shocks and lower stiffer eibach springs and polyurethane anti sway bar bushes. Might...

My 08 cls doesn’t have a DPF, think most of the facelift cars did Sent from my iPhone using Tapatalk

I had a front/rear BlackVue DR750s-2ch along with a blackvue magic pro to allow the camera to work with motion activation. I had it fitted by an auto electrician at tyremarks in Tavistock, one wire wired into ignition for switched power and the other into the fuse box for always live power...

Must be a fast taxi... Sent from my iPhone using Tapatalk

I believe this is also the case with the CLS too Kiwi. the thickness is that of the shim rather than the lowering effect and of course everycar will leave that factory with different shims due to different options and weights so take care when adjusting them or you might end joining the...

I’m using the Bilstein B12 kit on my CLS320cdi The ride quality is good, it is a little harsher over rough road as to be expected however on smoother roads the car feels a lot less floaty, especially at higher motorway speeds I believe it’s a good compromise between handling and comfort and...

I guess you didn't watch the video? the cutoff is very sharp, they make different models for both left and right hand drive traffic, and they are designed to be retrofitted into an existing housing, mounting to original mounting points.

Not forcing you to buy them, if you're interesting have a look around the web, plenty of info on these projectors.

I never said it was questionable, but the stock "safety equipment" is crap, plus said equipment is homologated stateside.