1. G

    injector screw/bolt broken ML270 CDI

    Hello, I'm new here but have read a lot on this subject. I have had this ML for about six months now, it is very clean and did run extremely well and everything works, but has quite high kilometers (340k). The car has a near complete service history by MB. I'm in rural France, and called a...
  2. C

    New wheels- new bolts required?

    Dear all, as some of you may know I have recently bought a new set of wheels for my W215. These are ET35 8.5J fr and 9.5J rr replacing ET44 (same width) originals. Will the increased offset require me to buy new bolts x 20? If so, can someone please tell me what length? I understand they...
  3. B

    2005 ML270 CDI Injector Clamp Threading gone

    We removed the injector to replace the copper washer. After cleaning the black, sticky substance and replacing the washer and injector, the clamp bolt will not lock in the cylinder because there is no threading there. I tried getting a tap long enough to reach the threading in the cylinder...
  4. olivier_wery

    Are these official Merc Wheels? and if so...

    Hi all, Can you let me know if you recognize these wheels as being official Mercs? Reason I am asking is that, there's a locking bolt on these.... and I don't have the key to unlock them... Apparently if there are official Mercs, a dealer would have a master key... if not... then it's the...

Save 30% on RAC Breakdown Cover
This year... and every year you stay with RAC
Prices start from only £35.35*
This offer is available to all MERCEDES CLUB members and their immediate family**
Top Bottom