Hi I am new here and have some problems with my clk.
I have saw old threads and tried all solutions but I can't solve the problem
I have a icarsoft mb v.3.0 and can read codes I have one code that is B1650-000
Power to microswitches defective
And when I want to run a test to the switches and sensors I only get n/a to all controll modules off the top I can identify the rooftop control module but that is it
I can read the hydraulic pump and that is fine the relay of the pump is clicking and thre are is no corrosion or damage to connections or wires I repaired those a year earlier after switching to top control module and a toplatch microswitch wire repair.
A ran okay til last summer.
After this winter I started again on the car and now I am stuck.
I have saw old threads and tried all solutions but I can't solve the problem
I have a icarsoft mb v.3.0 and can read codes I have one code that is B1650-000
Power to microswitches defective
And when I want to run a test to the switches and sensors I only get n/a to all controll modules off the top I can identify the rooftop control module but that is it
I can read the hydraulic pump and that is fine the relay of the pump is clicking and thre are is no corrosion or damage to connections or wires I repaired those a year earlier after switching to top control module and a toplatch microswitch wire repair.
A ran okay til last summer.
After this winter I started again on the car and now I am stuck.
