C220 2006 transmission conductor plate

[suncity3]

hi guys had a problem with car going into safe mode have put it down to conductor plate so have taken valve body out of car and about to fit new one thing is there are no covers on the solenoids do some of the 722.6 not have the covers ?

 

[Flyinspanner]

Don’t know, but are you doing the pilot bush whilst in there, think that can begin to weep, ....and as you have it out,

 

[suncity3]

Don’t know, but are you doing the pilot bush whilst in there, think that can begin to weep, ....and as you have it out,

thanks flyingspanner no did not its back in car now still have same fault code but my obd11 is not good enough to clear it merc here is ok so get them to do it and then see. was not to hard a job getting in and out some thing I did find I got the conductor plate from febi Bilstein ( made in Germany ) so they say if you look under the speed sensor tells you where it is made mine was Hungary any way thanks again.

 

[suncity3]

hi guys any idea on error code 2225 transmission control ?