edc fault

adam1

New Member
Joined
Nov 14, 2009
Messages
4
Reaction score
0
Hi
could anyone shed some light on a problem i,am having with a sprinter van 54 plate 311 cdi. starts and ticks over fine then when your driving edc light comes on and cuts out. had it on diagnostic and it came up with fuel pressure valve have replaced valve but has not solved the problem.
 
OP
A

adam1

New Member
Joined
Nov 14, 2009
Messages
4
Reaction score
0
  • Thread Starter
  • Thread starter
  • #2
Hi
could anyone shed some light on a problem i,am having with a sprinter van 54 plate 311 cdi. starts and ticks over fine then when your driving edc light comes on and cuts out. had it on diagnostic and it came up with fuel pressure valve have replaced valve but has not solved the problem.

:) came down to a fault in the wiring loom just above starter motor. quite a common fault.but when you go with the diagnostic it can come up with a few fault codes so check this first and this may save you some money and time.
 

drdre78

Senior Member
Joined
Sep 28, 2009
Messages
1,057
Reaction score
3
Location
london
Your Mercedes
mercedes c200 200
hi.when was last time you changed the fuel filter??or try new one
 


GAD was founded in 2009 where we developed bespoke ECU Remapping software for motorsport clients, moving forward, we have extended to road vehicles for both performance and economy,
contact GAD Tuninghttp://www.GADTuning.co.ukto discuss your requirements.
Top Bottom