flexi pipe update

[StevesPimpWagon]

took the flexi exhaust section of my c250td this evening to get some measurements, external diameter approx 70mmx200mm long local source only do 60mm wide,merc dealer cannot help system doesnt recognise my chassi number (southafrican import) and only do £759 front pipes any national contacts would be appreciated many thanks:

 

[antijam]

There is quite a lot on ebay - this one seems to be about your size.

http://cgi.ebay.co.uk/EXHAUST-FLEXI...14&_trkparms=72:1683|66:2|65:12|39:2|240:1318

 

[popuptoaster]

flexi pipe tends to fall apart if its right at the front due to the high temps, i'd go to a custom exhaust place and get a proper joining pipe made up made up from SS, it'll save doing it again in a few years.

 

[Uncle Benz]

I have used these before, and they have been good. I can recommend the inner braided ones.

http://www.bmcatalysts.co.uk

Can't make the direct link work. Go to products and then pick flexes

Fantastic mix of units. The diameters are in mm, the length in inches...