limp mode vito cdi

[culf7667]

yet another problem when driving around town alls fine all though the van is guttless but revs ok but i went on a run and when i came to a hill and needed to give some, it would stick at 3000 revs ive been told this is limp mode, but when i turn the ignition off and then start the van again it would be fine untill the next hill can anyone help

 

[Xtractorfan]

The most common problem is the air flow meter or MAf.. have it checked on a diagnostic machine. and if so fit the genuine item ...

 

[culf7667]

were is the maf sensor on the van i thought they are usually on the air filter pipe but im unable to see it cheers

 

[John Wenn]

Hi,
I am in the same situation with the limp mode on my 2002 108 cdi. Have you sorted your problem out yet and if so what was it ?
Cheers
John

 

[47p2]

Hi,
I am in the same situation with the limp mode on my 2002 108 cdi. Have you sorted your problem out yet and if so what was it ?
Cheers
John

W638 Vito vans suffer from broken wires below the air filter box which will cause them to go into limp mode and limit the revs to 3000