LAC
Senior Member
- Joined
- Oct 22, 2017
- Messages
- 45
- Reaction score
- 7
- Your Mercedes
- 2002 Mercedes-Benz E320 CDI S210
Hi Guys n Gals,
I am having a moment. My 2002 S210 E320CDi. I have an EGR diamond blanking plate. Where the hell do I fit it?
I have had the EGR deleted through the ECU and re-mapped, and it's a good'en - good economy (50 mpg) and quick. No more plumes of black crap from the back, suffocating drivers and passengers following.
However, when at temp and cruise kicks in, it drops into limp. Usually on motorways. A simple ignition stop/start resolves this. So I suspect that whilst the EGR has been programmed to remain closed, there is a slight leak hence the blank I need to fit.
Please can you advise where I apply the diamond blank I bought. Big thanks.
I may not get back to you tonight as calling it a night, but any direction is welcome.
Thank-you kindly once again.
Les.
I am having a moment. My 2002 S210 E320CDi. I have an EGR diamond blanking plate. Where the hell do I fit it?
I have had the EGR deleted through the ECU and re-mapped, and it's a good'en - good economy (50 mpg) and quick. No more plumes of black crap from the back, suffocating drivers and passengers following.
However, when at temp and cruise kicks in, it drops into limp. Usually on motorways. A simple ignition stop/start resolves this. So I suspect that whilst the EGR has been programmed to remain closed, there is a slight leak hence the blank I need to fit.
Please can you advise where I apply the diamond blank I bought. Big thanks.
I may not get back to you tonight as calling it a night, but any direction is welcome.
Thank-you kindly once again.
Les.