W126 Parts wanted 1987 300se

ben300se

Member
Joined
Jun 27, 2006
Messages
11
Reaction score
1
Location
Bedford
Website
www.justgiving.com
Looking for;
  • electric window motor for drivers side.
  • Drivers Door card pieces - the metal bit around the door release.
  • Spare wheel.

Advise needed.

  • Just given it a full service and now starting to get a juddery feeling when cruising on motorway, as if it doesn't want to maintain speed?
  • On occasion the revs do there own thing and can cut out?
 
OP
B

ben300se

Member
Joined
Jun 27, 2006
Messages
11
Reaction score
1
Location
Bedford
Website
www.justgiving.com
  • Thread Starter
  • Thread starter
  • #2
Work carried out so far!

The main thing I'm experiencing now is a motion (at 60 - 70 on the motorway) that feels like someone is gently rocking the seat back and forth;
As if it can't keep a constant speed?
Also;
  • could it be the new liquids/parts are settling?
  • At idol the revs sometimes increase then it dies?
  • The gear shift is jumpy heavy when accelerting at speed, around town its smooth?
  • I'm no mechanic but possibly it's not breathing properly?

Managed 175miles of half a tank since service!!!

Work carried out to date:

At garage after collection.
  • Refitted exhaust.
  • New plugs (found 4 & 6 knackerd and not firing).

My dad and me:
  • Oil Flush
  • New Oil
  • New Oil filter
  • New Sump plug/washer
  • Engine stop smoke
  • Engine stop leak
  • Rad Flush
  • Fresh water and Anti-freeze
  • New Air filter
  • Carb cleaner
  • Oil stop leak to box (for Auto box)
  • New wipers
  • Bulbs
  • Checked pads - OK!
  • New tyre

To do:
  • Tried fixing ventilation. Blower not working, Drivers elec window motor blow. Decided to replace that only. Need to find one or poss remove?
  • Raise money.
  • Get sponsored.
 
OP
B

ben300se

Member
Joined
Jun 27, 2006
Messages
11
Reaction score
1
Location
Bedford
Website
www.justgiving.com
  • Thread Starter
  • Thread starter
  • #3
www.justgiving.com/dingle-berry

It has been suggested: 'I'd say it's fuel.Try a new petrol filter and running a lot of redex through the tank'.


That had crossed my mind as somthing to change when we where tinkering before but I could not find it. All I could see was two large rubber pipes feeding the carb, Where is the filter?

What about HT leads od rotor arm, could these cause the problem?

Also; When under the bonnet I found an unidentifired device. It is positioned in the tray behind th bulkhead, near the wipers. It is small, black, has a wheel button that can be rotated and has letters printerd in it. Any idea???
 


GAD was founded in 2009 where we developed bespoke ECU Remapping software for motorsport clients, moving forward, we have extended to road vehicles for both performance and economy,
contact GAD Tuninghttp://www.GADTuning.co.ukto discuss your requirements.
Top Bottom