Evening everyone hope your weekend has gone well and not too much time spent tinkering!
I thought I would change the little ambient lights under the rear seat and dashboard to something a little brighter so I could find all the bits I drop in the footwells.
The fittings which just pull out to one side are fed by 12 volts, contain a microscopic led and load resistors plus a diffuser.
The diffuser just pops out if you prise it from the opposite end to the socket, this also holds the circuit board in place. I got rid of those and replaced it with a white LED with series resistor and trimmed the length to allow entry into the loom plug and central location of the LED now they illumante things in a gentle way! Cheaper option if one of them goes duff too.
I thought I would change the little ambient lights under the rear seat and dashboard to something a little brighter so I could find all the bits I drop in the footwells.
The fittings which just pull out to one side are fed by 12 volts, contain a microscopic led and load resistors plus a diffuser.
The diffuser just pops out if you prise it from the opposite end to the socket, this also holds the circuit board in place. I got rid of those and replaced it with a white LED with series resistor and trimmed the length to allow entry into the loom plug and central location of the LED now they illumante things in a gentle way! Cheaper option if one of them goes duff too.
Attachments
Last edited: