(1997,E230,m111.970 )Engine shuts off when pressing gas pedal from idle state

amkahal

Active Member
Joined
Dec 10, 2012
Messages
37
Reaction score
0
Location
Lebanon
Your Mercedes
E230 Avantgarde 1997
Hi all,
I have a problem on my car, all is normal until i put D and when pressing gas pedal the engine shuts off, noting that not always happening, it's random.
at many times, when pressing gas pedal, the RPM goes down for a while and then to normal and the engine dosent shuts off.
another observation, when parking, and when turning steering wheel to max limit and pressing gas, the engine also shuts off.

(during driving the car is perfect, the problem only occurs when pressing gas from idle)

Where to start ??
 

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
368
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
You could try unplugging the MAF, this effects idle when it start to fail, some cars will run better to prove the point but not all.
 

Peter G

Senior Member
Joined
Jan 13, 2014
Messages
177
Reaction score
0
Location
Warwickshire
Your Mercedes
2013 SL 350, 1989 Toyota Hilux, 1987 Fiesta XR2
Recently had a similar problem with my 540i. Didn't cut out but hesitated when throttle applied.

A new MAF solved it.
 
OP
A

amkahal

Active Member
Joined
Dec 10, 2012
Messages
37
Reaction score
0
Location
Lebanon
Your Mercedes
E230 Avantgarde 1997
  • Thread Starter
  • Thread starter
  • #5
LAUNCH system shows "Camshaft position sensor L5/1 signal implausible/missing 067", does this problem cause such behaviors ?
 

mattkh

Senior Member
Joined
Aug 2, 2006
Messages
3,166
Reaction score
354
Location
England
Your Mercedes
A160 W168 1999 1.6
Hi
It can do.
Check the electrical connection to the Camshaft position sensor first.
 

MEESEZ

New Member
Joined
Dec 25, 2009
Messages
2
Reaction score
0
I have same issue , Please write the solution her if you got it.
 

MEESEZ

New Member
Joined
Dec 25, 2009
Messages
2
Reaction score
0
Today morning I check cam sensor wire connection, there was resisters from cam wire connection, even the Engine control module was removed.

now the camshaft sensor is disconnected and there is not Different.
 


Welwyn Merx Limited is a family run business with genuine passion, dedication and 25 years of experience dealing with Mercedes-Benz and AMG passenger cars.
Tel: 01707 395999www.welwynmerx.uk
Top Bottom