Do i need to replace wiring harness after chaning camshaft magnets

[yazanh]

I replaced the front camshaft magnets after they started leaking oil, i cleaned the adapters and found some oil in ecu adapter and cleaned it. Do i need to replace the wires? I checked the car for codes and nothing came on. The car sometimes hesitates.
2006 c200k 47000 miles

 

[television]

You need to get the blocker for this, it plugs into the magnet and stops any more oil coming out.
You can leave the wires as they are for a short time and it will stop, but you may have to clean it once or twice.

The blocker cost £30.

 

[yazanh]

thanks for your help I will sure buy them.