torque

  1. W

    Rear Suspension Torque Settings: SLK R170 3.2 V6

    I am about to rebuild the rear suspension on a 2002 SLK R170, 3.2 V6. Replacing the suspension arms and rear springs. Haynes do not do a manual for this model. Does anyone know the various torque settings for this rebuild? Thanks
  2. Acid@MSL

    MERCEDES E63 AMG, IMPRESSIVE FIGURES

    Stunning Mercedes E63 AMG in recently making some impressive figures!!! _________________________ 767.11 WHP 905 BHP 895.97 WTQ 1057 lb/ft TQ __________________________ Mods: • Mslperformance map & dyno • Weistec W3 Turbos • Weistec Downpipes • Weistec bulletproof gearbox • Amsperformance...
  3. Acid@MSL

    Tuning Boxes

    Hey Guys Did you know we know offer tuning boxes for a large variety of vehicles. This is advantageous to those who want a bit more performance from there vehicles without compromising the manufacturers warranty. A lot of tuning boxes available are easy diy install and offer competitive...
  4. F

    Correct wheel nuts - 2002 E-Class

    Hello, Could anyone tell me: what the correct wheel nuts are for my car (52-reg 320 Diesel estate; 235/45 R17, 8J x 17) I don't seem to be able to find ones with the right length; most offered on, for example, E-Bay mention a thread length of 20mm or so but mine are about twice as long In...
  5. Smaltze

    E320 W210 Loss of torque after slow driving

    Hi guys, Got this anoying and ever more common problem with my w210. when i drive the car normally it goes like a rocket, and if i keep putting my foot down at every oppurtinity it kicks down and blasts off, head back. great. But recently often it has this problem that seems to occur only...
  6. Smaltze

    W210 Decat with straightpipe inside experiment

    W/S210 E320 2002 I deleted my primary cat a week or two ago inspired by Alexanderfoti's guide, i could definitely feel the effects. Unfortunately i could also feel the negative effects in that i had a noticeable reduction in low end torque and throttle response. It was barely any but enough...
  7. GAD Tuning LTD

    Mercedes E350 CDI Remapping!!!

    Hello again guys, So right after the C350 CDI was completed and on its way the Mercedes E350 CDI pulled in for the GAD magic!!! This has exactly the same engine and management system as the C350 CDI from earlier however the software variation and Software update numbers are completely...
  8. GAD Tuning LTD

    Mercedes C350 CDI Remapping!!!

    Hey guys, Today we had the member IanWhu in for power tuning to be completed on his C350 CDI!!! It was so nice to have a C350 CDI in as the ECU is SOOOOOOO much easier to get at! The vehicle runs the 265bhp engine which has higher pressure injectors, new head, improved turbo and improve...
  9. GAD Tuning LTD

    Mercedes E350 CDI Remapping!!!

    Afternoon guys and girls, Today at GAD we had another lovely E350 CDI in for power tuning. The 3.0 litre V6 has plenty to offer on the horse power and torque front along with refining the gearbox. ECU location is in the silly front right wing!!! After myself and Gary whipped it out I got...
  10. GAD Tuning LTD

    E350 CDI Remapping!!!

    Hey guys! Also had a 2010 E350 CDI in for power tuning today. This runs the EDC17 CP10 variation of ECU so it has to be removed from the vehicle and programmed to get round the anti-tuning protection. Being the 2010 its the 231bhp - 540nm stock and she is now running a healthy 295bhp and...
  11. GAD Tuning LTD

    350 CDI (265) Remap Developments

    As you guys are all aware we hold the record for the WORLDS FASTEST 350 CDI with power to the tune of 325 BHP 788 NM of torque. We have now made further improvements on the rebellion automotive owned 350 CDI. Air intake modifications and DPF modifications have been made so we can extract...
  12. C

    Mercedes Vito 2001 2.1 torque settings

    Hi I would like to know: 1) torque settings for big end bearings 2) cylinder head torque settings thanks
  13. W

    ML270 Torque converter to felxplate bolt torque value

    I broke one of the 6 bolts holding the torque converter to the flexplate today, jip I overtightened it I guess :( Thankfully I could get the bolt out again without having to split the engine and the gearbox. Tommorow I'll try to find 6 new bolts (only need 1, but if I am replacing 1 I could...
  14. B

    Rear sub-frame bush torque setting?

    Anyone know the correct torque setting for the front pair of bushes on the rear sub-frame for a W210? Is it 70Nm as per the W124?
  15. M

    E320 Torque Convertor

    I have just put my E320 estate into the garage because it developed a small shudder around 1500 rev's and got worse with more people in the car. The MB garage has been great and have always been. But the problem appears to be with the Torque Convertor and needs replacing, they contacted the...
  16. M

    '02' CLK200 - Question regarding head gasket change

    Over the weekend I'm changing my head gasket on my 2002 CLK200 Kompressor. Although I am competant in this area I have always had the assistance of a Haynes manual to advise on what order to torque the bolts and to what torque strength. As Haynes do not to my knowledge publish a workshop...


Chris Knott Insurance, see oursticky posts here!
www.ckinsurance.co.uk
Top Bottom