Tony Perry
New Member
- Joined
- Jun 19, 2017
- Messages
- 7
- Reaction score
- 0
- Your Mercedes
- 2010 c350 CDI V6
My 2010 C350 was shaking quit a lot and I decided to check under the bonnet to investigate further... that is when I found a cover had melted close to my oil cap and after I dug out the debris and cleaned it up I could then see a hole. When I turned the ignition on it started spitting diesel and smoke out of the hole! Can anyone advise what part this is that has the hole in and whether it's worth a DIY job or just to take it to Mercedes to get repaired. Also how this could of happened would be good info as well!