torque converter

Hi I have taken my car into a mb specialist in kent I am based in medway. Having judering from start up especially in cold weather. They have diagnosed it to be the torque converter which seems a common issue as has done 90k miles. They priced the job at £1,400 this is for a replacement wet...

I have a 09 plate auto sport CDI, I have literally spent an absolute bomb over the past month getting the car mechanicly sound as it was a bit ruff when I got it. Now I have a bigger problem!!!! When driving the car seems to jump out of gear into manual even though it says on the screen I am in...

Hello all, I bought the car ( w211 270 CDI 2003 ) only few days ago and i have very serious issues with the transmission i believe. Please check the video: IZd4s3rj6k4 The issue is happening at 0:13. I'm putting my foot off the throttle and then hit it gently again. I need to press it...

Right oh! So, today did the LubeGard treatment. New ATF (about 4.5L worth, so quite a decent amount) and 2 tubes of this. Long story short - no noticeable improvement. Yeah the vibration is a tad less, sure, but you might as well put it down to new ATF. I suppose saying NO improvement is a bit...

Hello, Okay I browsed around a bit on this forum for the word "jerky" but none of the post seem to cover the issue I am having so here goes... Since about 2 weeks I am noticing that the car needs just that half second more to change gears. Not always though... sometimes. Also, my TC vibration...

We own a 2011 convertible E350 W212 convertible. In July under its service plan it was serviced. This included a transmission oil change. It is now nearly November and the car has barely done 1000 miles in our ownership because either the transmission / torque converters have failed and been...

Sorry new to all this but have an issue I need all you experts to advise me on. I have a E270 (52 plate). Back in October 2013 I started noticing the car would shudder when accelerating on the motorway or going up hills. I was advised to have the wheels balanced and aligned which I did but the...

Hello, A while back I posted about an issue I was having with my W220... between 1100 and 1300 RPM I would get the "rumble-strip" vibration. We changed the fluid to 236.14 Fuchs, new filter, and, for a while, all seemed well. There still was some very mild vibration, but it was tolerable...